How to choose submersible pump cable
If it is a submersible sewage pump, the cable to be matched must be selected according to the liquid medium conveyed by the sewage pump. For example, the liquid conveyed is corrosive, then the rubber parts outside the cable must be made of stainless steel submersible pump and corrosion-resistant submersible cable, otherwise it will dangerous accident of electric leakage due to corrosion of diving cable.
When selecting the wiring of the submersible pump, first determine the size of the wiring according to the length of the cable. If the submersible pump is used, the power supply voltage itself is slightly lower than the voltage required by the submersible pump, and the configuration length of the required cable is added. When it is relatively long, the running cable of the submersible pump will become larger. If the submersible sewage pump works for a long time, it is very unfavorable for the motor of the submersible sewage pump. Under this condition, the cable wiring of the sewage pump should be equipped with YCW type or YC type rubber. Set of flexible cable, if it is not a cable that is submerged in water, it is recommended to use YCW type.
