500m³/h Submersible Slurry Pump With Agitator

500m³/h Submersible Slurry Pump With Agitator The submersible slurry pump is a coaxial water pump and motor. When working, the motor shaft drives the water pump impeller to rotate, transfers energy to the slurry medium, generates a certain flow rate, drives the solids to flow, and realizes the transportation of slurry.
Its main features are as follows:
500m³/h Submersible Slurry Pump With Agitator Chrome white iron is comprised of carbides and martensite. This combination makes chrome white iron exceptionally wear resistant and hard. The carbides in chrome white iron have a hardness range of 1500-1800HV and are primarily eutectic carbides. They form as bundles of hollow hexagonal rods. The growth of these rods will drastically affect the properties of the casting, which is controlled through the careful engineering of the chemical composition. Abrasion resistance is the property most desired when selecting a chrome white iron casting. At the foundry level the microstructure (carbides and martensite) is controlled to maximize the abrasion resistance for an application. There are many phenomena at work during cutting, gouging or scratching types of abrasion. The presence of carbides, the fatigue resistance and the toughness of high chrome white iron all play an important role in its abrasion resistance.
If there is a spare pump, it is best to use two pumps in turn. If the pump is stuck, you can only repair the pump. You can add a net at the water inlet to prevent too many impurities from entering the pump, so that the probability of the pump being stuck will be much smaller!
The pump should be divided into two aspects: electrical and mechanical. For the mechanical aspect, you can mainly compare the previous maintenance records. The second is the electrical aspect. You must understand the power of each pump motor and have a certain understanding of its control system. For slurry pumps with mechanical seals, the supply of shaft seal water must be guaranteed. It is strictly forbidden to operate without water, otherwise the mechanical seal will burn out.
Advantages

500m³/h Submersible Slurry Pump With Agitator First, the slurry pump has high operating efficiency and low loss. Second, the service life of the pump's flow-through parts is relatively long, saving production costs. Third, the entire industrial and mining system operates stably, and the operation of the entire industrial and mining system will not be affected by the operation problems of the pump. Fourth, selection parameters: outlet diameter, flow, dust, motor power, impeller speed, pumping rate, maximum particles, weight. Submersible slurry pumps can be widely used in mining, power, metallurgy, coal, environmental protection and other industries to transport abrasive slurries containing solid particles. Such as slurry transportation in metallurgical ore dressing plants, hydraulic ash removal in thermal power plants, coal slurry and heavy medium transportation in coal washing plants, dredging of rivers, river silt removal, etc.