Submersible Axial Flow Water Pump Manufacturer

Submersible axial flow water pumps are compact unit comprising of submersible motor and pump, capable to pump large capacities at low manometric heads. The axial flow pumps are widely used in agriculture irrigation, civil supply and drainage, water circulation industry power station, dock water level control, slight contaminate waste and other conservancy projects. Call us or email us to select a suitable pump.

QZ series submersible propeller axial pump is an excellent replacement to the traditional axial flow pump, the driving motor is a dry type, fully enclosed submersible three-phase asynchronous motor. The submersible axial flow water pumps are constructed with following visual features:

a.)Since the motor and pump are integrated, there is no need to carry out the shaft alignment assembly procedure on site, which makes on-site installation convenient and fast. 

b.)Due to the submersible operation, it can greatly simplify the civil engineering of the pumping station, reduce the installation area and save 30-40% of the total project cost. 

c.)Low noise, no high temperature in the pump station, improve the operating environment, and can build a fully underground pump station as required to maintain the ground environment style.

d.)The submersible axial pump adopts two mechanical seals. The insulation of submersible motor F-class, protection level is IP68 (IEC). The unified hydraulic model design has higher performance and reliability than the traditional water pumps, which is convenient for user to select models.

e.)Easy to operate, no need to lubricate the bearing of the Submersible axial flow water pump

 before starting the machine. It can be controlled nearby or remotely.

f.)When building pumping stations in areas along rivers and lakes where the water level fluctuates greatly, the use of submersible axial pumps is the most thorough solution to the problem of motor flood control.  The long shaft and intermediate bearing between the machine and the pump are removed to make the pump unit run more stably and reliably.

Designation of submersible axial flow water pump:

600   QZ  -  100  /  75KW

600: discharge diameter, mm

QZ: submersible axial flow pump

100: specific speed is 100x10

75kw: motor power

Performance range of Submersible axial flow water pump:

1. Capacity : 175-11000l/s 

2. Head : up to 20m

3. Speed : 250rpm to 3600rpm

4. Power : up to 7500kw

5. Voltage : 380V to 10000V

6. Discharge diameter:350-1600mm

6. Temperature range : Within 40 Deg C

7. Medium PH values: 4-10.

In this section you'll find Milestone offering of submersible propeller axial pump. The submersible propeller axial pumps are located inside a discharge column, which is often suspended from the top structure. Submersible column pumps are seated at the bottom of the column without any fasteners or special harder. They are quickly installed and removed for inspection and service, taking less space for the installation, requiring no priming water, etc. Robust and reliable Milestone submersible column pump is tested in the factory to ensure high performance and premium quality. Contact us for your most suitable solution.