Stainless Steel Water Pump With Motor

Stainless steel water pump with motor

1. Performance range of CZ type chemical pump (according to design point)

>Flow rate: Q 1.6-1500m3 / h

>Head: H 5-125m

>Working pressure: P is less than or equal to 1.6MPa

>Working temperature: t -20 ~ +150 degrees Celsius

2. CZ type chemical pump applicable industry

Chlor-alkali, soda ash industry; medicine, fertilizer, pesticide; petrochemical industry, chemical fiber, paper industry; dye industry; environmental protection engineering and water treatment system.

3. Structure of CZ type chemical pump

Horizontal rear door opening structure, the pump head and the motor are connected by a coupling, installed on the bottom plate, the impeller is a rear opening type, three bearings, the shaft seal is an external mechanical seal, equipped with a cooling device, the bearing body

The oil level is observed with an oil lens; the structure is compact and reasonable. The pump has cast feet on the pump body, which can bear the load from the pipeline and directly transfer it to the foundation, so that the pump rotor will not bend due to the load of the pump.

Thereby ensuring the best service life of the bearing and mechanical seal. It is not necessary to open the pipeline connected to the pump body for maintenance, as long as the bolts of the bracket and the pump body are opened and the two are separated, the impeller can be repaired

And mechanical seal, simple and convenient.

The direction of rotation of the pump: From the motor end to the pump, rotate clockwise.

4. Characteristics of CZ type chemical pump

The CZ standard chemical process pump is developed by our company by introducing advanced foreign technology. It can transport medium containing solid particles and is easy to crystallize. It is resistant to temperature, corrosion and clogging. The material can be selected according to the specific working conditions.

5. Sealing type: mechanical seal or packing seal.