Mining Slurry Pump

Slurry pump Description：
slurry pumps are designed to handle slurry particles for dredging operations.slurry pumps are designed for the continuous handling of the most higher abrasive slurries, containing solids to be pumped by a standard slurry pump.
They are suitable for delivering slurries in Mining, explosive-sludge in metal melting, dredging in dredger and course of rivers and other fields.
1. Construction of this pump is of double casing by means of clamp bands and wide wet passage.
2. The wet-parts are made of Ni-hard and high chromium abrasion-resistance alloys.
3. Eight exit directions:The outlet position of the pump can be spaced at 45 ºC as required, It can be rotated at eight different angles to install and use. This type of pump can also be used in series
4. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and Abrasion-resistance.

Slurry pumps are designed for heavy-wearing and heavy-duty uses like the transportation of abrasive fluid and corrosive Slurry in industries such as mining, dredging steel and sewage treatment.
Slurry pumps differ from the other pumps in many aspects like design and materials, when choosing a slurry pump you need take everything into consideration, otherwise it will cause the service life of the slurry pump to be greatly reduced.

 

 

 

 

 

 

 

 

 

 

 

Components of a Slurry Pump:
The essential components of a slurry pump include the volute or casing, impeller, shaft, sealing mechanism, motor or engine, and base plate. The volute is a curved funnel that collects and directs the flow of the pumped material. This part is typically made of hard-wearing materials such as chrome alloy steel to withstand the slurry’s high pressures and abrasive nature.
Impeller
The impeller is a rotating component that pushes the liquid forward and out of the volute. The component can be made from hard-wearing materials like chrome alloy steel or softer materials such as flexible rubber to help reduce wear and tear on the other pump parts.
Shaft
The shaft is a metal rod that connects the impeller to the motor or engine. This component is typically made of high-strength materials such as stainless steel to withstand the high stresses and torque generated by a powerful slurry pump.
Sealing Mechanism
The sealing mechanism prevents leakage of the pumped material around the impeller. It typically consists of a series of mechanical or hydraulic seals designed to move flexibly with the flow of the pumped material. This helps prevent damage and wear on the seals, which can be very costly to replace.

Application:
Slurry pump widely used in power plants, coal factory, mining plant, building materials and other industries,we have advanced processing and testing equipment, each slurry pump is rigorous tested before leaving the factory.

 

 

Model: 8-6-MAH
Flow: 360-830m3/h
Head: 10-61 m
Power:120 kw
Speed: 500-1140 r/min
Material: High Chrome Alloy
Layout: Horizontal

Useage: it is suitable for conveying high concentration slurry with strong abrasion or slurry with low concentration and high head.
Drive Mode: DC Direct drive, Cr parallel belt drive, zvz upper and lower belt drive, CV vertical belt drive, etc.

 

Application:
•Construction & Tunnelling
•Dredging
•Municipal
•Industrial
•Mining & Quarrying
•Power Stations

 

The Benefits Of Using a Slurry Pump:
There are so many benefits to using a slurry pump. Some of the benefits of using a slurry pump include the following:
•Increased efficiency and reliability in pumping thick liquids.
•Reduced downtime due to fewer clogs and blockages.
•Lower maintenance costs due to fewer parts that need replacing or repairing.
•Greater control over the flow rate of the liquid being pumped.
•Enhanced safety as they are designed with built-in safeguards against pressure overloads.