Horizontal High Flow Double Suction Water Pump

The suction and outlet of XS type high flow double suction water pump are located below the axis of the pump, the horizontal direction is perpendicular to the axis, and the pump shell is opened in the middle. It is not necessary to dismantle the water inlet during maintenance.

The discharge pipe and motor (or other prime mover) rotate counterclockwise from the coupling to the pump. If you need to order according to the special needs of users, you can also turn it clockwise.

The main parts of the water pump are: pump body, pump cover, impeller, shaft, double suction seal ring, shaft sleeve, bearing, etc. except that the shaft material is high-quality carbon steel, the rest are mostly cast iron. The pump body and the pump cover constitute the working cavity of the impeller.

Structure drawing of the high flow double suction water pump:

Technical specifications of the high flow double suction pump:

Material: Cast iron

Pump outlet diameter  Dn: 80-1000mm

Capacity Q:22-16236m3/h

Head H:7-300m

Temperature T: -20°C - 200°C

Solid Parameter ≤80mg/L

Permissible Pressure:  ≤5Mpa

Application: