10/8S-MG Gravel Pump For Sand Dredging

10/8S-MG Gravel Pump for sand dredging

   MG sand gravel pump (dredge pump,sand pump)with a single pump connected to the cassette shell structure,over passage spacious.  and the MG pumps are high head ones. The pumps are designed for continuously transferring strong corrosive big-solid-contained slurry which the common slurry pump cannot transfer. They are widely used in dredging, mining, explosive-sludge in metal melting, etc..

This sand pump flow components using the hard nickel, chromiun and other wear-resistant materials. 

Gravel pump outlet direction can be in any position of 360 degrees,easy to install, cavitation performance,anti-corrosion,etc..

Typical Application:

· Dredging in dredger

· River channel dredging

· Stone material processing factory

· Transferring power plant ash

· Delivering furnace clinker in iron works

Gravel pump features:

· Abrasion-resistance,corrosion-resistance; large capacity; wide flow channel; light weight; good performance of NPSH; easy maintenance; anti-clogging.

· Special clamping device of the jointing for pump body and pump cover enables the pump discharge point to any direction.

· The wet parts, including impeller, frame plate, throatbush, frame plate liner insert, all adopt anti-corrosive alloy cast iron or steel.

· The pump consists of pump head, seal assembly, bearing assembly and frame. The bearing assembly is lubricated by grease.

· The pump can be driven by V-belt, coupling directly or by reducer.

· Packing seal, expeller seal and mechanical seal are all available for the pump.

Selection chart