Vertical Inline Centrifugl Water Circulating Pump

Vertical inline centrifugl water circulating pump

ISG200-200 pump specification:

Vertical inline pump feature:

1. The pump has a vertical structure, with the same inlet and outlet diameters, and is located on the same centerline. It can be installed in the pipeline like a valve, with a compact and beautiful appearance, a small footprint, and low construction investment. If a protective cover is added Can be used outdoors.

2. The impeller is directly installed on the extended shaft of the motor, with short axial dimensions and compact structure. The pump and motor bearings are reasonably arranged, which can effectively balance the radial and axial loads generated by the pump operation, thereby ensuring the smooth operation of the pump. Low vibration and low noise.

3. Easy installation and maintenance, no need to dismantle the pipe road system, all the rotor parts can be taken out by removing the pump joint seat nut.

Condition:

1. Suction pressure ≤1. 0MPa, or the maximum working pressure of the pump system ≤ 1.6MPa, that is, the pump suction port pressure + pump head ≤ 1.6MPa, the pump static pressure test pressure is 2.5MPa, please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it shall be separately provided when ordering, so that the overflow part and the connection part of the pump are made of cast steel during manufacture.

2. Ambient temperature <40 ℃, relative humidity <95%.

3. The volume content of solid particles in the conveyed medium does not exceed 0.1% per unit volume, and the particle size is less than 0.2mm.
   

Contact:

• tammy@mstpump.cn

• 008615175232736