Multistage Boiler Feeding Water Pump

Boiler Feed Pump at power station Boiler Feed Pump at power station is a single-suction multistage segmented centrifugal pump, which is used to transport clean water or other liquids with physical and chemical properties similar to water. The temperature of the liquid should not exceed 80 °C.Horizontal multistage centrifugal pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. Boiler Feed Pump at power station can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system. Boiler Feed Pump at power station is a multi-stage segmented type.Its suction port is located on the water inlet section, in a horizontal direction, and the discharge port is vertically upward on the water section. Its head can be increased or decreased according to the use needs. Boiler Feed Pump at power station are: water inlet section, middle section, water outlet section, impeller, guide wing baffle, water outlet section guide wing, shaft, sealing ring, balance ring, shaft sleeve, tail cover and bearing body.

Send InquiryChat Now