Pump parameters: Flow:15m3/h Head:24m Impeller Dia:139mm Power:2.2kw Efficiency:61% NPSH:1.7m Pump use: The pump is applicable to conveying clean water and mediums whose physical and chemical properties are similar to those of water. Pump picture:
Hot Water Multistage Pump for Boiler Room
Product Description
Hot Water Multistage Pump for Boiler Room is one of our besting selling pump, mainly used in transporting high capacity fluid. We are professional manufacturer for Multistage pump/Multistage water pump, Hot Water...
horizontal multistage boiler feed water pump for heat exchange system
horizontal multistage boiler feed water pump is an efficient and energy-saving product designed for the new series of industrial steam boiler pumps.horizontal multistage boiler feed water pump mainly used...
Boiler Feed Pump at power station
Boiler Feed Pump at power station is a single-suction multistage segmented centrifugal pump, which is used to transport clean water or other liquids with physical and chemical properties similar to water. The temperature of the liquid should...
Split Case Centrifugal Pump for Hot Water
Split Case Centrifugal Pump for Hot Water is also called a single-stage double-suction centrifugal pump.
The suction port and discharge port of the Split Case Centrifugal Pump for Hot Water
are below the axis of the pump, and...
Split casing double suction pump
The split casing double suction pump is also called a single-stage double-suction centrifugal pump.
The suction port and discharge port of the split casing pump are below the axis of the pump, and the horizontal direction is vertical to...
D Type Horizontal multi-stage centrifugal pump
D type horizontal multi-stage centrifugal pump is a single-suction multi-stage segmented centrifugal pump, which is used to transport clean water or other liquids with physical and chemical properties similar to water. The...
Marine Pump for Sea Water 1. Marine Pump Introduction Marine pumps are single-stage centrifugal pumps equipped with mechanical shaft seal for maximum life and minimum friction loss. With connecting flanges according to international standards. Further the pumps can be fitted...
IS series single-stage end-suction centrifugal pump is designed according to the capability and size stipulated i n the international Standard ISO2858, it is composed of pump body, pump cover, impeller, shaft, ring seal, sleeve and suspended bearing units.
Centrifugal end suction water pump, also known as single stage pump, usually designed as a back pull out pump with a spacer coupling which facilitates maintenance without disturbing the alignment with the motor. The working principle centrifugal end suction water pump is: the...
The multi stage pump parts are very similar to those of the standard Centrifugal pump except for the Multistage Centrifugal pump where the additional parts are diffusers which efficiently channel the fluid into the eye of the impeller or to the following stage. In the side...
