diesel driven horizontal self priming wastewater pump

Product information

A self-priming pump uses an air and water mixture in order to reach its fully primed state. While called a self-priming pump, it is actually a centrifugal jet pump working principle. It uses force to create a pumping action by using a pressure differential in a liquid.

P self priming pump

Pump specification

Model No	Inlet size	Outlet size	Max Solid	Speed	Self priming
P2	2inch	2 inch	44.45mm	1150-2900rpm	7.3-7.6m
P3	3inch	3inch	63.5mm	650-2150rpm	1.5-7.6m
P4	4inch	4inch	76.2mm	650-1950rpm	1.5-7.6m
P6	6inch	6inch	76.2mm	650-1550rpm	2.4-7.6m
P8	8inch	8inch	76.2mm	650-1350rpm	2.4-7.0m
P10	10inch	10inch	76.2mm	650-1450rpm	2.1-6.7m
P12	12inch	12inch	76.2mm	650-1250rpm	1.6-4.9m

p2 performance

assembly part

How to check whether the inlet pipe of self-priming pump leaks？

Self-priming pump relies on the high-speed rotation of impeller to generate a low-pressure area in the self-priming pump to absorb water, so the self-priming pump must ensure that its water inlet pipe does not leak, that is, the outside air cannot enter the water inlet pipe. Otherwise, it will not only affect the efficiency of the pump, but also produce serious vibration and noise when the pump operates.

How to check the leakage of pump inlet pipeline?

(1) Duck feather method: use a duck feather to approach the suspected inlet when the pump is running, and observe the floating of the duck feather. In the same way, you can use lighted cigarettes to operate in this way. Through the floating direction of duck down hair and smoke to help find.

(2) Engine oil method: For air inlet points that are difficult to find out, a little engine oil can be coated on the determined approximate air inlet, and the air inlet is the place where the engine oil is sucked away quickly.