2,3,4,5,inch Easy Install Vertical Submersible Sewage Pump With Float Switch And Alarm

APPLICATION

         WQ series submersible sewage pump is mainly used for municipal works, industrial buildings, hotels, hospitals, civil air defence, mines  etc. 

STUCTURE DESCRIPTION

l Bearing :

         Imported SKF of NTN bearing ,which ,with a reasonable configuration,can oxtend the duration of the pump .

l Cooling :

          The built -in cooling system can have the pump normally work whether the motor is on or under the liquid surface.

l Motor:

         Of F class insulation ,max . working temperatures 155°C ,and of a protective grade IPX8 with the effective seal .

l Mechanical seal :

          Use Bogman mechanical seal of Germany ,two ways of the seal are in series with each other and individually work to separate the                       motor from the pump seal to provide the motor with a dual protection . 

l Impeller :

          With the optimized design ,the impeller will not be blocked up when to transport liquid with its optimum flow and rate and the                            maximum efficiency and min wearability.

l Pump casing :

         Use the know -how of CAD/CAM to make it of max .efficiency and min wearability.

l Float switch :

         The float switch will give a warning sigual (the indicator lights),when leakage occurs on the mechanical seal on the motor side ,the liquid            goes into the switch room and reaches a certain height ,to stop the pump 

WQ TYPE PUMP INSTALLATION METHOD

l Auto-Coupled Installation

         The pump is placed down along with the guide and automatically connected to the drainage pipeline system .Less cost for mounting and           lowering the cost for repair.

l Movable Hard Pipe/Soft Pipe Installation

l Fixed Dry /Wet Installation

TECHNICAL PARAMETER

STRUCTURE DESCRIPTION

REFERENCE TABLE FOR PIPELINE LOSS

OUR SERVICE

l Customers service:24 hours online and reply within eight hours.

l Warranty:1year

l After-sales maintenance:Available

l Delivery:Shipping ,Plant

FAQ:

l What is a submersible sewage pump?

        The sewage pump is a single-phase pump that is used for activities that have lower power requirements. These single-phase pumps have           a float switch that makes automatic operation possible. ... Fibrous solids disrupt the flow of liquids in a pump by clogging it.

l What is the difference between sewage pump and a slurry pump?

          Whilst a sewage pump is defined by its ability to pump away sewage and other materials from a property, a sump pumps sole purpose is            to make sure that a properties basement does not flood or retain water at any point. Usually, a sump pump will act as part of a larger                   basement waterproofing solution.

l How long do the sewage pumps last?

          7 to 10 years

          While most sewage ejector pumps are designed to withstand at least 7 to 10 years of use, with some even lasting much longer,                            occasionally problems do arise long before the pump has reached the end of its life span.